BRAKE PEDAL (for LHD) REMOVAL


  1. REMOVE COMBINATION METER ASSEMBLY

    Click here

  2. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY

    Click here

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A003SON

      Disconnect the connector.

    2. A003RUN

      Turn the stop light switch assembly counterclockwise and remove the stop light switch assembly.

  4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  5. REMOVE BRAKE PEDAL RETURN SPRING


    1. A003TQK

      Remove the brake pedal return spring from the brake pedal support sub-assembly and push rod pin.

  6. REMOVE PUSH ROD PIN


    1. A003SBG

      Remove the clip and push rod pin to separate the brake pedal sub-assembly from the push rod clevis.

  7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A003RHR

      Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement.

    2. A003SZN

      Disengage the clamp.

    3. A003UX1

      Remove the 4 nuts and brake pedal support assembly.

    4. A003SFR

      Remove the nut from the brake pedal support assembly.