INPUT SHAFT OIL SEAL REPLACEMENT


  1. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE INPUT SHAFT TYPE T OIL SEAL


    1. A003SFSE01
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with the tip taped, remove the oil seal.

  3. INSTALL INPUT SHAFT TYPE T OIL SEAL


    1. A003UV2E01

      Coat the lip of a new oil seal with MP grease.

    2. Using SST and a hammer, tap in the oil seal.

      SST
      09330-50010
      Oil seal installation depth
      1.0 to 1.8 mm (0.0394 to 0.0709 in.)

      Note


      • Ensure that no foreign matter adheres to the oil seal lip.

      • Ensure that the oil seal is not at an angle.

  4. INSTALL HYBRID VEHICLE TRANSAXLE ASSEMBLY

    Click here