CRUISE CONTROL MAIN SWITCH INSPECTION


  1. INSPECT CRUISE CONTROL MAIN SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      A003UXUE12
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 3 Main Switch off 1 MΩ or higher
      Main Switch on Below 2.5 Ω
      + RES 235 to 245 Ω
      - SET 617 to 643 Ω
      CANCEL 1509 to 1571 Ω
      Text in Illustration
      *1

      Component without harness connected

      (Cruise Control Main Switch)

      		 *2 Main Switch
      *3 Lever *4 ON/OFF
      *5 - SET *6 + RES
      *7 CANCEL - -