CRUISE CONTROL SYSTEM ROAD TEST


  1. PROBLEM SYMPTOM CONFIRMATION


    1. A003RQRE08
      Text in Illustration
      *1 ON/OFF
      *2 - SET

      Inspect the SET function.


      1. Turn the cruise control switch (ON-OFF button) on.

      2. Check that the cruise control indicator illuminates on the combination meter assembly.

      3. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      4. A003SIME01
        Text in Illustration
        *1 Cruise Control Indicator

        Push the cruise control switch to - SET.

      5. After releasing the switch, check that the vehicle cruises at the set speed.

    2. A003UBJE02
      Text in Illustration
      *1 ON/OFF
      *2 - SET
      *3 + RES

      Inspect the + function.


      1. Turn the cruise control switch (ON-OFF button) on.

      2. Drive at the required speed (40 km/h (25 mph) or higher).

      3. Push the cruise control switch to - SET.

      4. Check that vehicle speed increases while the cruise control switch is pushed to + RES, and that the vehicle cruises at the newly set speed when the switch is released.

      5. Push the cruise control switch to + RES and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1 mph) (tap-up control).

    3. A003RQRE08
      Text in Illustration
      *1 ON/OFF
      *2 - SET

      Inspect the - function.


      1. Turn the cruise control switch (ON-OFF button) on.

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to - SET.

      4. Check that vehicle speed decreases while the cruise control switch is pushed to - SET, and the vehicle cruises at the newly set speed when the switch is released.

      5. Push the cruise control switch to - SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.6 km/h (1 mph) (tap-down control).

    4. A003T69E01
      Text in Illustration
      *1 ON/OFF
      *2 - SET
      *3 CANCEL

      Inspect the CANCEL function.


      1. Turn the cruise control switch (ON-OFF button) on.

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to - SET.

      4. When performing any one of the following, check that the operation of the cruise control system is cancelled, normal driving resumes.


        • Depressing the brake pedal

        • Moving the shift lever from D to other

        • Turning the cruise control switch off

        • Pulling the cruise control switch to CANCEL

    5. A003UBJE03
      Text in Illustration
      *1 ON/OFF
      *2 - SET
      *3 + RES

      Inspect the RES function.


      1. Turn the cruise control switch (ON-OFF button) on.

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to - SET.

      4. Cancel the cruise control system by performing any of the above operations (other than turning the main switch off).

      5. After pushing the cruise control switch to "+ RES" at a driving speed of more than 40 km/h (25 mph), check that the vehicle resumes the speed set prior to the cancellation.