EXHAUST PIPE REMOVAL


  1. DRAIN COOLANT (for Engine with Exhaust Heat Recirculation System)

    Note

    Do not remove the reservoir tank cap and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. Remove the reservoir tank cap.

      A003UP5E01
      Text in Illustration
      *1 Reservoir Tank Cap *2 Radiator Drain Cock Plug
      *3 Air Release Valve (w/ Air Release Valve) - -

    2. Loosen the radiator drain cock plug and drain the coolant.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the local regulations.

  2. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A003TUQ

      Remove the 2 bolts and 2 compression springs.

    2. Remove the tail exhaust pipe assembly from the 2 exhaust pipe supports.

    3. Remove the gasket from the front exhaust pipe assembly.

  3. REMOVE NO. 2 ENGINE UNDER COVER


    1. A003T7Y

      Remove the 4 clips and No. 2 engine under cover.

  4. REMOVE FRONT CENTER FLOOR BRACE


    1. A003SAU

      Remove the 4 bolts and front center floor brace.

  5. REMOVE HEATED OXYGEN SENSOR


    1. A003U53

      Disconnect the heated oxygen sensor connector.

    2. Remove the wire harness bracket.

    3. Remove the bolt and separate the wire harness clamp bracket.

    4. A003SRJ

      Disconnect the wire harness to remove the wire harness clamp bracket.

    5. A003TFCE02

      Using SST, remove the heated oxygen sensor.

      SST
      09224-00010

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY (w/ Exhaust Heat Recirculation System)


    1. A003UGJ

      Disconnect the 2 heater water hoses.

    2. A003THP

      Remove the 2 bolts and 2 compression springs.

    3. Remove the front exhaust pipe assembly from the 3 exhaust pipe supports.

    4. Remove the gasket from the exhaust manifold.

  7. REMOVE FRONT EXHAUST PIPE ASSEMBLY (w/o Exhaust Heat Recirculation System)


    1. A003THP

      Remove the 2 bolts and 2 compression springs.

    2. Remove the front exhaust pipe assembly from the 3 exhaust pipe supports.

    3. Remove the gasket from the exhaust manifold.