INTAKE MANIFOLD REMOVAL


  1. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  2. REMOVE EGR PIPE ASSEMBLY


    1. A003SHC

      Disconnect the 2 wire harness clamps.

    2. A003U8S

      Remove the bolt and wire harness support.

    3. A003TVM

      Remove the 4 bolts, EGR pipe assembly and 2 gaskets.

  3. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A003T4X

      Disconnect the connector.

    2. Remove the bolt and manifold absolute pressure sensor.

  4. REMOVE VACUUM SWITCHING VALVE ASSEMBLY


    1. A003TOY

      Disconnect the connector and 2 fuel vapor feed hoses.

    2. A003TXZ

      Remove the bolt and vacuum switching valve assembly.

  5. REMOVE INTAKE MANIFOLD


    1. A003SBT

      Disconnect the 3 connectors and 2 wire harness clamps.

    2. Remove the engine oil level dipstick.

    3. A003SLW

      Disconnect the wire harness clamp, and then remove the 2 bolts and engine oil level dipstick guide sub-assembly.

    4. Remove the O-ring from the engine oil level dipstick guide sub-assembly.

    5. A003TLT

      Disconnect the fuel vapor feed hose and ventilation hose.

    6. A003RNA

      Remove the 2 bolts, 2 nuts and intake manifold.

    7. Remove the No. 1 intake manifold to head gasket.

  6. REPLACE STUD BOLT

    Tech Tips

    If a stud bolt is deformed or the threads are damaged, replace it.


    1. A003TI8

      Using an E6 "TORX" wrench, replace the 2 stud bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }