CANISTER INSTALLATION


  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

    2. Install the fuel pressure regulator assembly.

  2. INSTALL FUEL PUMP


    1. A003T38E05
      Text in Illustration
      *1 O-ring
      *2 Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. Connect the fuel pump harness connector.

    3. A003SEY

      Engage the 5 claws of the fuel pump.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the suction filter.

    4. Engage the 2 claws of the No. 1 fuel suction support.

    5. A003RPD

      Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    6. A003RJK

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

    7. Connect the connector of the fuel pump harness.

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A003V0NE02

      Install the fuel sender gauge assembly by sliding it downward.

    2. Connect the connector of the fuel sender gauge assembly.

    3. Install the 2 harness protectors.

      Note

      Do not damage the wire harness.

    4. Connect the 3 harness clamps.

  4. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE

    Click here