BATTERY BLOWER INSTALLATION


  1. INSTALL BATTERY COOLING BLOWER ASSEMBLY

    Note


    • Be sure not to touch the fan part of the battery cooling blower assembly.

    • Do not lift the battery cooling blower assembly using the wire harness.


    1. A003RJZ

      Install the battery cooling blower assembly with the 2 bolts and nut.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Connect the battery cooling blower assembly connector and clamp.

    3. A003U79

      Connect the 3 wire harness clamps.

  2. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

    Note

    Ensure that the duct is installed securely.


    1. Install the No. 1 hybrid battery intake duct with the 2 clips.

  3. INSTALL NO. 1 HYBRID BATTERY EXHAUST DUCT


    1. Insert the No. 1 hybrid battery exhaust duct with the clip.

      Note

      Ensure that the duct is installed securely.

  4. INSTALL REAR FLOOR BOARD SPACER


    1. Install the rear floor board spacer with the 2 clips.

  5. INSTALL REAR SEAT SIDE GARNISH RH


    1. Engage the 6 claws and 2 clips, and install the rear seat side garnish RH.

  6. INSTALL REAR SEAT BACK HINGE SUB-ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure described for the LH side Click here.

  7. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side Click here.

  8. INSTALL REAR NO. 1 FLOOR BOARD


    1. Engage the 2 claws, 2 clips and 3 guides.

    2. Install the rear No. 1 floor board with the bolt.

  9. INSTALL DECK BOARD SUB-ASSEMBLY


    1. Engage the 3 claws and 3 clips to install the deck board sub-assembly.

  10. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. Engage the 2 pins.

    2. Connect the 2 suspenders and install the package tray trim panel assembly.

  11. INSTALL REAR SEAT ASSEMBLY RH

    Click here