BATTERY BLOWER REMOVAL


  1. REMOVE REAR SEAT ASSEMBLY RH

    Click here

  2. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. A003SY6

      Disengage the 2 suspenders.

    2. Disengage the 2 pins and remove the package tray trim panel assembly.

  3. REMOVE DECK BOARD SUB-ASSEMBLY


    1. A003SXQ

      Disengage the 3 claws and 3 clips, and remove the deck board sub-assembly.

  4. REMOVE REAR NO. 1 FLOOR BOARD


    1. A003SLI

      Remove the bolt.

    2. Disengage the 2 claws, 2 clips and 3 guides, and remove the rear No. 1 floor board.

  5. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side Click here.

  6. REMOVE REAR SEAT BACK HINGE SUB-ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure described for the LH side Click here.

  7. REMOVE REAR SEAT SIDE GARNISH RH


    1. A003S7L

      Disengage the 6 claws and 2 clips, and remove the rear seat side garnish RH.

  8. REMOVE REAR FLOOR BOARD SPACER


    1. A003U03

      Remove the 2 clips and rear floor board spacer.

  9. REMOVE NO. 1 HYBRID BATTERY EXHAUST DUCT


    1. A003UG0

      Remove the clip and No. 1 hybrid battery exhaust duct.

  10. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT


    1. A003RSF

      Remove the 2 clips and No. 1 hybrid battery intake duct.

  11. REMOVE BATTERY COOLING BLOWER ASSEMBLY

    Note


    • Be sure not to touch the fan part of the battery cooling blower assembly.

    • Do not lift the battery cooling blower assembly using the wire harness.


    1. A003U79

      Disconnect the 3 wire harness clamps.

    2. A003RJZ

      Disconnect the battery cooling blower assembly connector and clamp.

    3. Remove the 2 bolts, nut and battery cooling blower assembly.