SERVICE PLUG GRIP REMOVAL


  1. PRECAUTION

    Click here

  2. REMOVE REAR FLOOR MAT


    1. A003TLX

      Remove the rear floor mat.

  3. REMOVE REAR DECK FLOOR BOX


    1. A003TAA

      Remove the rear deck floor box.

  4. REMOVE BATTERY BOX COVER


    1. A003UZD

      Disengage the 3 guides and remove the battery box cover.

  5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE SERVICE PLUG GRIP

    CAUTION:


    • Wear insulating gloves.

    • Remove the service plug grip to interrupt the high voltage circuit at the time of inspection or repair.

    • Keep the removed service plug grip in your pocket to prevent other technicians from accidentally reconnecting it while you are servicing the vehicle.

    • All the high voltage wiring connectors are colored in orange.


    1. Wear insulating gloves and remove the service plug grip after sliding up the lever of the service plug grip as shown in the illustration.

      A003U1R

      CAUTION:


      • Keep the removed service plug grip in your pocket to prevent other technicians from accidentally reconnecting it while you are servicing the vehicle.

      • After removing the service plug grip, do not touch the high voltage connectors or terminals for 10 minutes.

      Tech Tips

      Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.