ACCELERATOR PEDAL SENSOR INSTALLATION


  1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.


    1. Install the accelerator pedal sensor assembly with the 2 bolts.

      Torque:
      8.7 N*m  { 89 kgf*cm, 77 in.*lbf }

    2. Connect the accelerator pedal sensor assembly connector.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A003S74E03

      Engage the guide.

    2. Engage the claw.

    3. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <C> or <D>.