TEMPERATURE SWITCH REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER

  2. DRAIN COOLANT (for Engine)

    Note

    Do not remove the reservoir tank cap and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. Remove the reservoir tank cap.

      A003UP5E01
      Text in Illustration
      *1 Reservoir Tank Cap *2 Radiator Drain Cock Plug
      *3 Air Release Valve (w/ Air Release Valve) - -

    2. Loosen the radiator drain cock plug and drain the coolant.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the local regulations.

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A003TUZ

      Disconnect the engine coolant temperature sensor connector.

    2. A003UE8

      Using a union nut wrench (19 mm), remove the engine coolant temperature sensor.

      Note

      Do not apply any excessive force to the heater pipe when removing the engine coolant temperature sensor.