RADIO ANTENNA CORD REMOVAL


  1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)


    1. A003TUS

      Disengage the 4 clips and remove the center instrument cluster finish panel sub-assembly.

  3. REMOVE RADIO RECEIVER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. A003RXW

      Remove the 4 bolts <K> and remove the radio receiver opening cover with bracket.

  4. REMOVE RADIO RECEIVER WITH BRACKET (w/ Radio Receiver)


    1. A003THF

      Remove the 4 bolts.

    2. A003SIJ

      Pull the radio receiver with bracket toward the rear of the vehicle and disengage the 4 clips.

    3. Disconnect each connector and remove the radio receiver with bracket.

  5. REMOVE NAVIGATION RECEIVER WITH BRACKET (w/ Navigation System)


    1. A003U5C

      Remove the 4 bolts.

    2. Pull the navigation receiver with bracket toward the rear of the vehicle and disengage the 4 clips.

    3. A003UGK

      Disconnect each connector and remove the navigation receiver with bracket.

  6. REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. A003SDH

      Disconnect the connector.

    2. A003ST8

      Disengage the clamp.

    3. A003TEUE01
      Text in Illustration
      *A w/o Radio Receiver

      Remove the bolt.

    4. w/o Radio Receiver:


      1. Disconnect the connector.

    5. Disengage the 5 clamps and remove the antenna cord sub-assembly.

  7. REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. A003SDH

      Disconnect the connector.

    2. A003ST8

      Disengage the clamp.

    3. A003UW1E01
      Text in Illustration
      *A w/o Radio Receiver

      Remove the bolt.

    4. w/o Radio Receiver:


      1. Disconnect the connector.

    5. Disengage the 4 clamps and remove the antenna cord sub-assembly.

  8. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  9. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Remove the adhesive tape so that the No. 2 antenna cord sub-assembly can be removed.

    2. Release the No. 2 antenna cord from the notch of the roof headlining assembly. Remove the No. 2 antenna cord from the roof headlining assembly.

      A003TNPE02
      Text in Illustration
      *A w/o Sliding roof *B w/ Sliding roof
      *1 Adhesive tape *2 Notch
      *a Front - -