REAR DOOR SPEAKER INSTALLATION


  1. INSTALL REAR SPEAKER ASSEMBLY


    1. Using an air riveter or hand riveter, install the rear speaker assembly with 3 new rivets.

      A003U92E02
      Text in Illustration
      *1 Riveter *2 Mandrel
      *a INCORRECT - -

      Note


      • Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

      • Confirm that the rivet is seated properly against the moulding. Do not tilt the riveter when installing the rivet to the moulding. Do not leave any space between the rivet head and moulding.

      • Do not leave any space between the moulding and door frame. Firmly hold the 2 items together while installing the rivet.

      Tech Tips

      If the rivet cannot be cut, pull it once and cut it.

    2. A003T5X

      Connect the connector.

  2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. Connect the connector.

    2. A003UCF

      Engage the rear door trim board with the 3 claws on the rear door inner glass weatherstrip.

    3. Engage the 9 clips to install the rear door trim board to the rear door panel.

    4. A003RKD

      Install the 3 screws.

  3. INSTALL DOOR ASSIST GRIP COVER


    1. A003SRH

      Engage the 4 claws and install the door assist grip cover.

  4. INSTALL REAR DOOR INSIDE HANDLE BEZEL


    1. A003SOG

      Engage the 3 claws to install the rear door inside handle bezel.