RADIO RECEIVER REMOVAL


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. A003RXOE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. Insert a roof moulding remover and slide the remover toward the clip.

    3. A003TXA

      Pull the remover with both hands to disengage the clip as shown in the illustration.

    4. A003RUL

      Disengage the 3 clips and remove the instrument panel finish panel end LH.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


    1. A003ROAE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. Insert a roof moulding remover and slide the remover toward the clip.

    3. A003TRZ

      Pull the remover with both hands to disengage the clip as shown in the illustration.

    4. A003SOQ

      Disengage the 3 clips and remove the instrument panel finish panel end RH.

  3. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A003T1DE03

      Disengage the 5 claws, 2 clips, and 3 guides.

    2. Disconnect the connector and remove the center instrument panel register assembly.

  4. REMOVE RADIO RECEIVER WITH BRACKET


    1. A003THF

      Remove the 4 bolts.

    2. A003SIJ

      Pull the radio receiver with bracket toward the rear of the vehicle and disengage the 4 clips.

    3. Disconnect each connector and remove the radio receiver with bracket.

  5. REMOVE NO. 2 RADIO BRACKET


    1. A003SSM

      Remove the 4 screws and No. 2 radio bracket.

  6. REMOVE NO. 1 RADIO BRACKET


    1. A003TMB

      Remove the 4 screws and No. 1 radio bracket.

  7. REMOVE RADIO RECEIVER ASSEMBLY