FRONT DOOR BELT MOULDING INSTALLATION


  1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY


    1. Engage the 5 claws and clip, and install the front door belt moulding assembly.

  2. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY


    1. A003S0IE01

      Insert the front door glass sub-assembly into the front door panel along the front door glass run as shown in the illustration.

    2. A003TNQ

      Install the front door glass sub-assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  3. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER


    1. Engage the claw, and temporarily install the outer rear view mirror assembly with cover.

    2. Install the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

  4. INSTALL OUTER MIRROR INSTALL HOLE COVER


    1. Engage the guide and the 3 claws, and install the outer mirror install hole cover.

  5. INSTALL FRONT DOOR SERVICE HOLE COVER


    1. Apply butyl tape to the front door panel.

    2. Pass the front door lock remote control cable and rear door inside locking cable through a new front door service hole cover.

    3. A003TJBE02
      Text in Illustration
      *1 Reference Point

      Attach the front door service hole cover by using the reference points on the front door panel.

      Note

      Securely install the front door service hole cover avoiding wrinkles and air bubbles.

    4. Connect the connector.

  6. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A003U7T

      Install the front door inner glass weatherstrip.

  7. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY


    1. A003T8I

      Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

    2. A003SJL

      Engage the 2 claws and install the front door inside handle sub-assembly.

  8. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. Connect each connector.

    2. A003SYF

      Engage the front door trim board with the 4 claws on the front door inner glass weatherstrip.

    3. Engage the 9 clips and install the front door trim board to the front door panel.

    4. A003T3P

      Install the 3 screws.

  9. INSTALL DOOR ASSIST GRIP COVER


    1. A003RR8

      Engage the 4 claws and install the door assist grip cover.

  10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL


    1. A003RQF

      Engage the 3 claws and install the front door inside handle bezel.