NAME PLATE INSTALLATION


  1. INSTALL NO. 3 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the name plate. (If reusing the name plate)


      1. Using a heat light, heat the name plate.

      2. Remove the double-sided tape from the name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the name plate.

    3. Install the No. 3 back door name plate.


      1. Using a heat light, heat the vehicle body and name plate.

      2. Remove the release paper from the name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the name plate.

        A003T7SE01
        Text in Illustration
        *1 Profile of Back Door Panel - -
        Reference measurement
        Area Measurement
        A 32.3 mm (1.271 in.)
        B 49.3 mm (1.940 in.)
        C 61.8 mm (2.433 in.)
        D 109.9 mm (4.326 in.)

  2. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the name plate. (If reusing the name plate)


      1. Using a heat light, heat the name plate.

      2. Remove the double-sided tape from the name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the name plate.

    3. Install the No. 2 back door name plate.


      1. Using a heat light, heat the vehicle body and name plate.

      2. Remove the release paper from the name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the name plate.

        A003SW6E01
        Text in Illustration
        *1 Profile of Back Door Panel - -
        Reference measurement
        Area Measurement
        A 130.7 mm (5.146 in.)
        B 65.5 mm (2.579 in.)
        C 69.6 mm (2.740 in.)
        D 282.3 mm (11.114 in.)

  3. INSTALL NO. 1 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the name plate. (If reusing the name plate)


      1. Using a heat light, heat the name plate.

      2. Remove the double-sided tape from the name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the name plate.

    3. Install the No. 1 back door name plate.


      1. Using a heat light, heat the vehicle body and name plate.

      2. Remove the release paper from the name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the name plate.

        A003UUWE01
        Text in Illustration
        *1 Profile of Back Door Panel - -
        Reference measurement
        Area Measurement
        A 68.7 mm (2.704 in.)
        B 108.8 mm (4.283 in.)
        C 64.9 mm (2.555 in.)
        D 220.3 mm (8.673 in.)

  4. INSTALL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the emblem. (If reusing the emblem)


      1. Using a heat light, heat the emblem.

      2. Remove the double-sided tape from the emblem.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the emblem.

    3. Install the emblem.


      1. Using a heat light, heat the vehicle body and emblem.

      2. Remove the release paper from the emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the emblem.

        A003RLEE01
        Text in Illustration
        *1 Location Pin - -

  5. INSTALL SIDE PANEL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the side panel emblem. (If reusing the side panel emblem)


      1. Using a heat light, heat the side panel emblem.

      2. Remove the double-sided tape from the side panel emblem.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the side panel emblem.

    3. Install the side panel emblem.


      1. Using a heat light, heat the vehicle body and side panel emblem.

      2. Remove the release paper from the side panel emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the side panel emblem.

        for LH side:

        A003SCYE01
        Text in Illustration
        *1 Profile of Back Fender Panel - -
        Reference measurement
        Area Measurement
        A 74.2 mm (2.921 in.)
        B 143.5 mm (5.649 in.)
        C 173.4 mm (6.826 in.)
        D 2.5°

        for RH side:

        A003SC4E01
        Text in Illustration
        *1 Profile of Back Fender Panel - -
        Reference measurement
        Area Measurement
        A 51.2 mm (2.015 in.)
        B 174.7 mm (6.877 in.)
        C 155.4 mm (6.118 in.)
        D 2.2°