HAZARD WARNING SWITCH INSTALLATION


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    1. Engage the 2 claws to install the hazard warning signal switch assembly.

      Note

      Do not use any dropped switches.

  2. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. A003U5ME03

      Engage the 3 guides, 5 claws and 2 clips, and install the center instrument panel register assembly.

  3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. A003SDS

      Engage the 4 clips and install the instrument panel finish panel end LH.

  4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. A003ROO

      Engage the 4 clips and install the instrument panel finish panel end RH.