REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY


  1. REMOVE REAR COMBINATION LIGHT GASKET


    1. A003TWQ

      Remove the rear combination light gasket.

      Note


      • Be sure to remove all traces of the old gasket from the body.

      • Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.

      • The round packing also needs to be replaced.

  2. REMOVE STOP LIGHT BULB


    1. A003RNJ

      Turn the stop light bulb and the rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.

    2. Remove the stop light bulb from the rear combination light socket and wire sub-assembly.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A003RS0

      Turn the rear turn signal light bulb and the rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  4. REMOVE TAIL LIGHT BULB


    1. A003RXA

      Turn the tail light bulb and the rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.

    2. Remove the tail light bulb from the rear combination light socket and wire sub-assembly.

  5. REMOVE REAR FOG LIGHT BULB (w/ Rear Fog Light)


    1. A003RPM

      Turn the rear fog light bulb and the rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.

    2. Remove the rear fog light bulb from the rear combination light socket and wire sub-assembly.

  6. REMOVE BACK UP LIGHT BULB


    1. A003SWM

      Turn the back up light bulb and the rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.

    2. Remove the back up light bulb from the rear combination light socket and wire sub-assembly.

  7. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A003UW2

      Disengage the claw and 2 guides, and remove the rear combination light socket and wire subassembly.