DAYTIME RUNNING LIGHT ASSEMBLY INSTALLATION


  1. INSTALL DAYTIME RUNNING LIGHT ASSEMBLY


    1. Engage the pin.

    2. Install the daytime running light assembly with the 2 screws.

  2. INSTALL FOG LIGHT ASSEMBLY


    1. Remove the screw.

    2. Disengage the 2 guides and remove the fog light assembly.

  3. INSTALL FRONT BUMPER ASSEMBLY


    1. Connect the 2 fog light connectors.

    2. w/ Headlight Cleaner System:


      1. Fill up washer jar with washer fluid Click here.

    3. A003S2L

      Engage the 6 claws and install the front bumper assembly.

    4. A003T9S

      Install the 4 bolts and 3 clips.

    5. A003TD1

      Install the 6 screws.

    6. A003T5J

      Install the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A003U0CE01
      Text in Illustration
      *1 Correct
      *2 Incorrect

      Install the pin hold clip.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. Remove the protective tape.

  4. ADJUST FOG LIGHT AIMING

    Click here