HIGH INTENSITY DISCHARGE HEADLIGHT BULB REMOVAL


  1. PRECAUTION FOR HEADLIGHT BULB REPLACEMENT

    Click here

  2. REMOVE REAR FLOOR MAT


    1. A003TLX

      Remove the rear floor mat.

  3. REMOVE REAR DECK FLOOR BOX


    1. A003TAA

      Remove the rear deck floor box.

  4. REMOVE BATTERY BOX COVER


    1. A003UZD

      Disengage the 3 guides and remove the battery box cover.

  5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE INLET NO. 1 AIR CLEANER (for LH Side)


    1. A003RUF

      Remove the clip.

    2. Disengage the 2 claws and remove the inlet No. 1 air cleaner.

  7. REMOVE HEADLIGHT BACK COVER


    1. A003SGW

      Remove the headlight back cover.

  8. REMOVE DISCHARGE HEADLIGHT BULB


    1. A003T4R

      Separate the light control ECU socket as shown in the illustration.

    2. A003TRYE01

      Release the set spring and remove the discharge headlight bulb as shown in the illustration.

      Note


      • After the discharge headlight bulb is replaced, make sure that it comes on. Then, reinstall all the parts that were removed to replace the bulb.

      • Do not touch the bulb glass with your fingers.