LIGHTING SYSTEM Diagnosis Circuit

DESCRIPTION

The headlight leveling ECU assembly outputs DTC information to the intelligent tester via this circuit.

WIRING DIAGRAM

A003UC2E08

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (DLC3 - HEADLIGHT LEVELING ECU)


    1. Disconnect the A35 headlight leveling ECU assembly connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A35-15 (INIT) - E11-7 (SIL) Always Below 1 Ω
      A35-15 (INIT) - Body ground Always 10 kΩ or higher

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here