HEADLIGHT LEVELING ECU INSTALLATION


  1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY


    1. Connect the connector.

    2. Install the headlight leveling ECU assembly with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)

    Click here

  3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)


    1. A003UK1E03
      Text in Illustration
      *1 Hinge

      Insert the glove compartment door assembly horizontally and engage the 2 hinges.

      Note

      Engaging the hinges from the top will deform the hinges. Be sure to install the glove compartment door assembly horizontally.

    2. A003U44E02
      Text in Illustration
      *1 Stopper
      *2 Glove Compartment Door Stopper

      Bend portions (A) and (B) in the direction indicated by the arrows in the illustration to engage the 2 stoppers.

    3. Engage the claw, connect the glove compartment door stopper, and install the glove compartment door assembly.

  4. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

    Click here

  5. ADJUST HEADLIGHT AIMING

    Click here