HEADLIGHT LEVELING ECU REMOVAL


  1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)

    Click here

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)


    1. A003TTXE02
      Text in Illustration
      *1 Stopper
      *2 Glove Compartment Door Stopper

      Disengage the claw and release the glove compartment door stopper.

    2. Bend portions (A) and (B) in the direction indicated by the arrows in the illustration to release the 2 stoppers, and lower the glove compartment door assembly until the front of the door is level.

    3. A003TCOE03
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door assembly horizontally toward the rear of the vehicle to release the 2 hinges, and remove the glove compartment door assembly.

      Note

      Pulling the glove compartment door assembly upward to remove it will cause the hinges to deform when reinstalling the door. Be sure to pull out the compartment door horizontally.

  3. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY


    1. A003SLF

      Remove the bolt.

    2. Connect the connector and remove the headlight leveling ECU assembly.