WASHER MOTOR (for Rear Side) INSPECTION


  1. INSPECT REAR WASHER MOTOR AND PUMP ASSEMBLY


    1. Remove the washer jar.

    2. Disconnect the rear washer motor and pump connector.

      Tech Tips

      The check should be performed with the rear washer motor and pump installed on the washer jar.

    3. Fill the washer jar with washer fluid.

    4. A003U3OE02
      Text in Illustration
      *1

      Component without harness connected

      (Rear Washer Motor and Pump Assembly)

      Connect a battery positive (+) lead to terminal 1 of the rear washer motor and pump, and a negative (-) lead to terminal 2.

    5. Check that washer fluid flows from the washer jar.

      OK
      Washer fluid flows from the washer jar.

      If the result is not as specified, replace the rear washer motor and pump assembly.