WASHER MOTOR (for Front Side) REMOVAL


  1. REMOVE FRONT BUMPER ASSEMBLY


    1. A003TJ4E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A003RVRE01

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A003T5J

      Remove the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. A003T9S

      Remove the 4 bolts and 3 clips.

    5. A003TD1

      Remove the 6 screws.

    6. A003RJX

      Disengage the 6 claws and remove the front bumper assembly as shown in the illustration.

    7. Disconnect the 2 fog light connectors.

    8. w/ Headlight Cleaner System:


      1. Drain washer fluid Click here.

  2. DRAIN WASHER FLUID


    1. A003RSY

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

  3. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A003TDT

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly.