FRONT WIPER MOTOR ON-VEHICLE INSPECTION


  1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A003TK0E02

      for LH Side


      1. Check the stop (park) position.

        Tech Tips

        The front wiper stops at the position shown in the illustration.

        Text in Illustration
        *1 Louver Edge
        *2 Ceramic Notch

        Tech Tips

        Hold the arm hinge by hand to fasten the nut.

        Area Measurement
        A 25.5 to 40.5 mm (1.00 to 1.59 in.)

      2. Operate the windshield wiper motor assembly.

      3. Stop the windshield wiper motor assembly operation.

      4. Check the automatic stop (park) position.

        OK
        The front wiper stops at the position shown in the illustration.
        Text in Illustration
        *1 Louver Edge
        *2 Ceramic Notch

        Tech Tips

        Hold the arm hinge by hand to fasten the nut.

        Area Measurement
        A 25.5 to 40.5 mm (1.00 to 1.59 in.)
    2. A003U1SE02

      for RH Side


      1. Check the stop (park) position.

        Tech Tips

        The front wiper stops at the position shown in the illustration.

        Text in Illustration
        *1 Louver Edge
        *2 Ceramic Notch

        Tech Tips

        Hold the arm hinge by hand to fasten the nut.

        Area Measurement
        A 17.5 to 32.5 mm (0.69 to 1.28 in.)

      2. Operate the windshield wiper motor assembly.

      3. Stop the windshield wiper motor assembly operation.

      4. Check the automatic stop (park) position.

        OK
        The front wiper stops at the position shown in the illustration.
        Text in Illustration
        *1 Louver Edge
        *2 Ceramic Notch

        Tech Tips

        Hold the arm hinge by hand to fasten the nut.

        Area Measurement
        A 17.5 to 32.5 mm (0.69 to 1.28 in.)