HOOD REASSEMBLY


  1. CONNECT WASHER HOSE ASSEMBLY


    1. A003UQS

      Connect the washer hose assembly.

  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle sub-assembly so that the washer fluid spray area is as specified.

      A003SADE01

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. A003RSZ

      Connect a new washer nozzle sub-assembly to the washer hose.

    2. A003SKC

      Engage the 2 claws and connect the washer nozzle sub-assembly.

  4. INSTALL HOOD INSULATOR


    1. A003TEE

      Install the hood insulator with the 6 clips.

  5. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check the position that the washer fluid hits the windshield.

      A003SSAE02
      Standard Clearance
      Area Measurement Area Measurement
      A 345 mm (13.583 in.) B 77 mm (3.0315 in.)
      C 575 mm (22.638 in.) D 53 mm (2.0866 in.)
      Text in Illustration
      *1 Upper Limit *2 Standard
      *3 Lower Limit - -
      OK
      Washer fluid hits the windshield in the areas shown in the illustration.

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.