SLIDING ROOF HOUSING DISASSEMBLY


  1. REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY


    1. A003SZG

      Remove the 2 bolts and sliding roof drive gear sub-assembly.

  2. REMOVE SUNSHADE TRIM SUB-ASSEMBLY


    1. A003UCP

      Remove the screw and sliding roof piece sub-assembly LH.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A003TUV

      Slide and remove the sunshade trim sub-assembly.

  3. REMOVE SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY

    Note

    Disassemble the sliding roof drive cable sub-assembly only when replacing it.


    1. A003U59

      Remove the screw and sliding roof side stopper.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A003UT5E02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws. Then slide the sliding roof drip channel rearward to remove it.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Using a screwdriver, slide the sliding roof drive cable sub-assembly in the direction indicated by the arrow in the illustration to remove it.

      A003TW2E05
      Text in Illustration
      *1 Window Deflector *2 Sliding Roof Drive Cable Sub-assembly
      *a Hold the window deflector down until the sliding roof drive cable sub-assembly becomes disengaged from the window deflector. - -