POWER WINDOW REGULATOR MOTOR (for Rear Door) INSPECTION


  1. INSPECT REAR DOOR WINDOW REGULATOR ASSEMBLY (for RH Side)


    1. A003TN6E03
      Text in Illustration
      *1 Clockwise
      *2 Counterclockwise
      *a

      Component without harness connected

      (Rear Door Window Regulator Assembly (for RH Side))

      Apply battery voltage to the motor connector according to the table below.

      Note

      Do not apply battery voltage to any terminals except terminals 1, 2, 4, 7 and 10.

      OK
      Switch Condition Measurement Condition Specified Condition
      Manual Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 7 (DOWN)

      		 Motor gear rotates clockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 10 (UP)

      		 Motor gear rotates counterclockwise
      Auto Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 4 (AUTO), 7 (DOWN)

      		 Motor gear rotates clockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 4 (AUTO), 10 (UP)

      		 Motor gear rotates counterclockwise

      If the result is not as specified, replace the rear door window regulator assembly (for RH side).

  2. INSPECT REAR DOOR WINDOW REGULATOR ASSEMBLY (for LH Side)


    1. A003U4ZE04
      Text in Illustration
      *1 Clockwise
      *2 Counterclockwise
      *a

      Component without harness connected

      (Rear Door Window Regulator Assembly (for LH Side))

      Apply battery voltage to the motor connector according to the table below.

      Note

      Do not apply battery voltage to any terminals except terminals 1, 2, 4, 7 and 10.

      OK
      Switch Condition Measurement Condition Specified Condition
      Manual Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 7 (DOWN)

      		 Motor gear rotates counterclockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 10 (UP)

      		 Motor gear rotates clockwise
      Auto Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 4 (AUTO), 7 (DOWN)

      		 Motor gear rotates counterclockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 4 (AUTO), 10 (UP)

      		 Motor gear rotates clockwise

      If the result is not as specified, replace the rear door window regulator assembly (for LH side).