POWER WINDOW REGULATOR MOTOR (for Front Door) INSPECTION


  1. INSPECT FRONT DOOR WINDOW REGULATOR ASSEMBLY (for Driver Side)


    1. Apply battery voltage to the motor connector according to the table below.

      A003UHQE05

      Note

      Do not apply battery voltage to any terminals except terminals 1, 2, 4, 7 and 10.

      OK
      Switch Condition Measurement Condition Specified Condition
      Manual Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 7 (DOWN)

      		 Motor gear rotates clockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 10 (UP)

      		 Motor gear rotates counterclockwise
      Auto Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 4 (AUTO), 7 (DOWN)

      		 Motor gear rotates clockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 4 (AUTO), 10 (UP)

      		 Motor gear rotates counterclockwise
      Text in Illustration
      *A for LHD *B for RHD
      *1 Counterclockwise *2 Clockwise
      *3 Motor Gear - -
      *a

      Component without harness connected

      (Front Door Window Regulator Assembly (for Driver Side))

      		 - -

      If the result is not as specified, replace the front door window regulator assembly (for driver side).

  2. INSPECT FRONT DOOR WINDOW REGULATOR ASSEMBLY (for Front Passenger Side)


    1. Apply battery voltage to the motor connector according to the table below.

      A003UHQE05

      Note

      Do not apply battery voltage to any terminals except terminals 1, 2, 4, 7 and 10.

      OK
      Switch Condition Measurement Condition Specified Condition
      Manual Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 7 (DOWN)

      		 Motor gear rotates clockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 10 (UP)

      		 Motor gear rotates counterclockwise
      Auto Operation

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 4 (AUTO), 7 (DOWN)

      		 Motor gear rotates clockwise

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (GND), 4 (AUTO), 10 (UP)

      		 Motor gear rotates counterclockwise
      Text in Illustration
      *A for RHD *B for LHD
      *1 Counterclockwise *2 Clockwise
      *3 Motor Gear - -
      *a

      Component without harness connected

      (Front Door Window Regulator Assembly (for Driver Side))

      		 - -

      If the result is not as specified, replace the front door window regulator assembly (for front passenger side).