REAR POWER WINDOW SWITCH REMOVAL


  1. REMOVE REAR DOOR INSIDE HANDLE BEZEL


    1. A003UPWE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with the tip wrapped with protective tape, disengage the 3 claws and remove the rear door inside handle bezel.

  2. REMOVE DOOR ASSIST GRIP COVER


    1. A003TX0E02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with the tip wrapped with protective tape, disengage the 4 claws and remove the door assist grip cover.

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. A003RKD

      Remove the 3 screws.

    2. A003UCF

      Using a clip remover, disengage the 9 clips.

    3. Disengage the 3 claws and separate the rear door trim board sub-assembly from the rear door inner glass weatherstrip.

    4. A003SUF

      Disengage the 2 claws and disconnect the rear door inside handle sub-assembly.

    5. Disconnect the connector.

  4. REMOVE SWITCH BEZEL


    1. A003TL6

      Disengage the 4 claws and remove the switch bezel.

  5. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A003TZL

      Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws and remove the rear power window regulator switch assembly.