FRONT PASSENGER SIDE POWER WINDOW SWITCH INSPECTION

INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Front Passenger Side)

1. Check that the switch functions.

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Power Window Regulator Switch Assembly (for Front Passenger Side))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition 6 (UP) - 1 (GND) Up / Auto up operation Below 1 Ω 7 (DOWN) - 1 (GND) Down / Auto down operation Below 1 Ω 8 (AUTO) - 1 (GND) Auto up / down operation Below 1 Ω

      If the result is not as specified, replace the power window regulator switch assembly (for front passenger side).

2. Check that the LED illuminates.

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Power Window Regulator Switch Assembly (for Front Passenger Side))

      Apply battery voltage to the power window regulator switch assembly (for front passenger side) and check that the LED illuminates.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Terminal 4 (LED) Battery negative (-) → Terminal 1 (GND) LED illuminates

      If the result is not as specified, replace the power window regulator switch assembly (for front passenger side).