FRONT PASSENGER SIDE POWER WINDOW SWITCH REMOVAL


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL


    1. A003RJAE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with the tip wrapped with protective tape, disengage the 3 claws, and remove the front door inside handle bezel.

  2. REMOVE DOOR ASSIST GRIP COVER


    1. A003T8OE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with the tip wrapped with protective tape, disengage the 4 claws and remove the door assist grip cover.

  3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A003T3P

      Remove the 3 screws.

    2. A003SYF

      Using a clip remover, disengage the 9 clips.

    3. Disengage the 4 claws and separate the front door trim board sub-assembly from the front door inner glass weatherstrip.

    4. A003SJL

      Disengage the 2 claws and disconnect the front door inside handle sub-assembly.

    5. Disconnect each connector.

  4. REMOVE FRONT ARMREST BASE PANEL UPPER


    1. A003UQ1

      Disengage the 7 claws and remove the front armrest base panel upper.

  5. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A003T8U

      Disengage the 2 claws and remove the power window regulator switch assembly.