POWER WINDOW MASTER SWITCH INSPECTION


  1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    1. A003TOME03
      Text in Illustration
      *a

      Component without harness connected

      (Power Window Regulator Master Switch Assembly)

      Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 18 (LED)

      Battery negative (-) → Terminal 12 (GND)

      		 LED illuminates

      If the result is not as specified, replace the power window regulator master switch assembly.