ROOF HEADLINING DISASSEMBLY


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A003SWYE10
      Text in Illustration
      *1 Bulb Holder
      *a Claw (A)
      *b Claw (B)

      Disengage the 2 claws (A) and separate the bulb holder from the vanity light assembly as shown in the illustration.

    2. Disengage the claw (B) and remove the vanity light assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE NO. 1 ROOF SILENCER PAD (w/o Sliding Roof)


    1. Remove the 4 No. 1 roof silencer pads from the roof headlining assembly.

      A003T3W

  3. REMOVE NO. 1 ROOF SILENCER PAD (w/ Sliding Roof)


    1. Remove the No. 1 roof silencer pad from the roof headlining assembly.

      A003TTK

  4. REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)


    1. Remove the No. 2 roof silencer pad from the roof headlining assembly.

      A003TTP

  5. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Remove the adhesive tape so that the No. 2 antenna cord sub-assembly can be removed.

    2. Release the No. 2 antenna cord from the notch of the roof headlining assembly. Remove the No. 2 antenna cord from the roof headlining assembly.

      A003TNPE02
      Text in Illustration
      *A w/o Sliding roof *B w/ Sliding roof
      *1 Adhesive tape *2 Notch
      *a Front - -

  6. REMOVE NO. 1 ROOF WIRE (w/o Sliding Roof)


    1. Turn the visor connectors counterclockwise approximately 90° and separate the connectors from the roof headlining assembly.

    2. Remove the adhesive tape from the roof headlining assembly.

    3. Remove the No. 1 roof wire from the roof headlining assembly.

      A003TYUE01
      Text in Illustration
      *A

      for LHD

      w/ Rain Sensor

      w/ EC Mirror

      		 *B

      for RHD

      w/ Rain Sensor

      w/ EC Mirror
      *1 Adhesive Tape - -

  7. REMOVE NO. 1 ROOF WIRE (w/ Sliding Roof)


    1. Turn the visor connectors counterclockwise approximately 90° and separate the connectors from the roof headlining assembly.

    2. Remove the adhesive tape from the roof headlining assembly.

    3. Remove the No. 1 roof wire from the roof headlining assembly.

      A003S8BE01
      Text in Illustration
      *A

      for LHD

      w/ Rain Sensor

      w/ EC Mirror

      		 *B

      for RHD

      w/ Rain Sensor

      w/ EC Mirror
      *1 Adhesive Tape - -