FRONT BLOWER MOTOR INSTALLATION


  1. INSTALL BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)


    1. Install the blower motor sub-assembly with the 3 screws.

    2. Connect the connector.

  2. INSTALL BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)


    1. Install the blower motor sub-assembly with the 4 screws.

    2. Connect the connector.

    3. Install the quick heater connector screw.

  3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Engage the guide.

    2. Engage the 3 claws and install the instrument panel No. 2 instrument panel under cover sub-assembly.