FRONT BLOWER MOTOR REMOVAL


  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A003SPSE03

      Disengage the 3 claws.

    2. Disengage the guide and remove the No. 2 instrument panel under cover sub-assembly.

  2. REMOVE BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)


    1. A003RYA

      Disconnect the connector.

    2. Remove the 3 screws and the blower motor sub-assembly.

  3. REMOVE BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)


    1. A003RTH

      Remove the quick heater connector screw.

    2. Connect the connector.

    3. Remove the 4 screws and the blower motor sub-assembly.