FRONT SEAT OUTER BELT ASSEMBLY REMOVAL


  1. REMOVE REAR FLOOR MAT


    1. A003TLX

      Remove the rear floor mat.

  2. REMOVE REAR DECK FLOOR BOX


    1. A003TAA

      Remove the rear deck floor box.

  3. REMOVE BATTERY BOX COVER


    1. A003UZD

      Disengage the 3 guides and remove the battery box cover.

  4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A003UER

      Disengage the 10 claws and remove the front door scuff plate LH.

  6. REMOVE REAR DOOR SCUFF PLATE LH


    1. A003UM1

      Disengage the 8 claws and remove the rear door scuff plate LH.

  7. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  8. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

  9. REMOVE LAP BELT OUTER ANCHOR COVER


    1. A003STN

      Disengage the 3 claws and remove the lap belt outer anchor cover.

  10. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY


    1. A003SSS

      Remove the bolt and disconnect the floor end of the front seat outer belt assembly LH.

  11. REMOVE LOWER CENTER PILLAR GARNISH LH


    1. A003RNZ

      Disengage the 4 claws and 2 clips, and remove the lower center pillar garnish LH.

  12. REMOVE UPPER CENTER PILLAR GARNISH LH


    1. A003TA3

      Remove the 2 screws.

    2. Using a clip remover, disengage the clip and remove the upper center pillar garnish LH.

  13. REMOVE FRONT SEAT OUTER BELT ASSEMBLY


    1. A003RUS

      Remove the nut and disconnect the shoulder anchor.

    2. A003TUJ

      Disconnect the pretensioner connector as shown in the illustration.

    3. A003SEV

      Remove the 2 bolts and front seat outer belt assembly.

  14. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


    1. A003TLH

      Remove the 2 bolts and front shoulder belt anchor adjuster assembly.