FRONT PASSENGER SEAT BELT WARNING LIGHT REMOVAL


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. A003RXOE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. Insert a roof moulding remover and slide the remover toward the clip.

    3. A003TXA

      Pull the remover with both hands to disengage the clip as shown in the illustration.

    4. A003RUL

      Disengage the 3 clips and remove the instrument panel finish panel end LH.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


    1. A003ROAE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. Insert a roof moulding remover and slide the remover toward the clip.

    3. A003TRZ

      Pull the remover with both hands to disengage the clip as shown in the illustration.

    4. A003SOQ

      Disengage the 3 clips and remove the instrument panel finish panel end RH.

  3. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A003T1DE03

      Disengage the 5 claws, 2 clips, and 3 guides.

    2. Disconnect the connector and remove the center instrument panel register assembly.

  4. REMOVE REAR CONSOLE BOX COVER


    1. A003TPH

      Disengage the 4 clips.

    2. Disengage the 2 guides.

    3. Disconnect the connector and remove the rear console box cover.

  5. REMOVE UPPER CONSOLE PANEL


    1. A003S2W

      Disengage the 7 claws.

    2. Disconnect the connector and remove the upper console panel.

  6. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A003SLR

      Remove the 2 screws <E> or <F>.

    2. A003SBJ

      Disengage the 4 claws and 6 clips, and remove the lower center instrument panel finish panel.

  7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Radio Receiver Type)


    1. A003TUS

      Disengage the 4 clips and remove the center instrument cluster finish panel sub-assembly.

  8. REMOVE RADIO RECEIVER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. A003RXW

      Remove the 4 bolts <K> and remove the radio receiver opening cover with bracket.

  9. REMOVE RADIO RECEIVER WITH BRACKET (for Radio Receiver Type)


    1. A003THF

      Remove the 4 bolts.

    2. A003SIJ

      Pull the radio receiver with bracket toward the rear of the vehicle and disengage the 4 clips.

    3. Disconnect each connector and remove the radio receiver with bracket.

  10. REMOVE RADIO AND DISPLAY RECEIVER WITH BRACKET (for Radio and Display Type)


    1. A003TW7

      Remove the 4 bolts.

    2. Disconnect each connector and remove the radio and display receiver with bracket.

  11. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A003RPO

      Disengage the 4 clips and remove the air conditioning control assembly.

    2. Disconnect the connector.