FRONT PASSENGER SEAT BELT WARNING LIGHT REMOVAL


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. A003RXOE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. Insert a roof moulding remover and slide the remover toward the clip.

    3. A003TXA

      Pull the remover with both hands to disengage the clip as shown in the illustration.

    4. A003RUL

      Disengage the 3 clips and remove the instrument panel finish panel end LH.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


    1. A003ROAE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. Insert a roof moulding remover and slide the remover toward the clip.

    3. A003TRZ

      Pull the remover with both hands to disengage the clip as shown in the illustration.

    4. A003SOQ

      Disengage the 3 clips and remove the instrument panel finish panel end RH.

  3. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A003T1DE03

      Disengage the 5 claws, 2 clips, and 3 guides.

    2. Disconnect the connector and remove the center instrument panel register assembly.

  4. REMOVE REAR CONSOLE BOX COVER


    1. A003TPH

      Disengage the 4 clips.

    2. Disengage the 2 guides.

    3. Disconnect the connector and remove the rear console box cover.

  5. REMOVE UPPER CONSOLE PANEL


    1. A003S2W

      Disengage the 7 claws.

    2. Disconnect the connector and remove the upper console panel.

  6. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A003SLR

      Remove the 2 screws <E> or <F>.

    2. A003SBJ

      Disengage the 4 claws and 6 clips, and remove the lower center instrument panel finish panel.

  7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)


    1. A003TUS

      Disengage the 4 clips and remove the center instrument cluster finish panel sub-assembly.

  8. REMOVE RADIO RECEIVER WITH BRACKET (w/ Radio Receiver)


    1. A003THF

      Remove the 4 bolts.

    2. A003SIJ

      Pull the radio receiver with bracket toward the rear of the vehicle and disengage the 4 clips.

    3. Disconnect each connector and remove the radio receiver with bracket.

  9. REMOVE NAVIGATION RECEIVER WITH BRACKET (w/ Navigation System)


    1. A003U5C

      Remove the 4 bolts.

    2. Pull the navigation receiver with bracket toward the rear of the vehicle and disengage the 4 clips.

    3. A003UGK

      Disconnect each connector and remove the navigation receiver with bracket.

  10. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A003RPO

      Disengage the 4 clips and remove the air conditioning control assembly.

    2. Disconnect the connector.