FRONT SEAT CUSHION HEATER REMOVAL


  1. REMOVE REAR FLOOR MAT


    1. A003TLX

      Remove the rear floor mat.

  2. REMOVE REAR DECK FLOOR BOX


    1. A003TAA

      Remove the rear deck floor box.

  3. REMOVE BATTERY BOX COVER


    1. A003UZD

      Disengage the 3 guides and remove the battery box cover.

  4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Click here.

  5. REMOVE FRONT SEAT HEADREST ASSEMBLY

  6. REMOVE OUTER SEAT TRACK COVER


    1. A003V17

      Lift up the seat track adjusting handle and move the seat to the foremost position.

    2. Disengage the 2 claws and remove the outer seat track cover.

  7. REMOVE INNER SEAT TRACK COVER


    1. A003TY7

      Disengage the 2 claws and remove the inner seat track cover.

  8. REMOVE FRONT SEAT ASSEMBLY


    1. A003S68

      Remove the 2 bolts on the rear side of the seat.

    2. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    3. A003UQF

      Remove the 2 bolts on the front side of the seat.

    4. Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.

    5. Disconnect the connectors under the seat.

    6. Remove the seat.

      Note

      Be careful not to damage the vehicle body.

  9. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    1. A003TCVE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.

  10. REMOVE VERTICAL ADJUSTER COVER


    1. A003U69E02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the vertical adjuster cover.

  11. REMOVE VERTICAL ADJUSTING HANDLE


    1. A003RQ2

      Remove the 2 screws and the vertical adjusting handle.

  12. REMOVE FRONT SEAT CUSHION SHIELD


    1. A003SSGE02

      Remove the 2 screws.

    2. Disengage the guide and remove the front seat cushion shield.

  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disconnect each connector and clamp.

    2. A003T6M

      Remove the nut and the front seat inner belt assembly.

  14. REMOVE FRONT SEAT CUSHION INNER SHIELD


    1. A003SIAE02

      Remove the 2 screws.

    2. Separate the 2 guides and remove the front seat cushion inner shield.

  15. REMOVE FRONT SEAT CUSHION COVER WITH PAD


    1. A003TMO

      Remove the hooks.

    2. A003SKV

      for Passenger Side:

      Disconnect the belt warning occupant detection sensor.

    3. w/ Seat Heater System:


      1. Disengage the 2 clamps.

        A003SHNE02
        Text in Illustration
        *1 Clamp - -
        *a Front Side - -

      2. Disconnect the connector.

    4. A003RJU

      Remove the hooks and the separate type front seat cushion cover with pad.

    5. A003SMI

      Remove the hook.

  16. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A003T40

      Disengage the 9 claws and remove the separate type front seat cushion cover.

  17. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY


    1. A003RKJE02

      Remove the 8 tag pins and the front seat cushion heater assembly.