REAR SEAT ASSEMBLY (for RH Side) INSTALLATION


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY RH


    1. A003SN8E03
      Text in Illustration
      *a Protective Tape

      Install the rear seat center outer belt assembly, rear seat inner belt assembly RH, and washer with the bolt.

      Torque:
      41 N*m  { 420 kgf*cm, 30 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat inner belt assembly to overlap protruding parts of the floor panel.

  2. INSTALL REAR SEAT ASSEMBLY RH


    1. Place the rear seat assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Install the rear side of the rear seat assembly RH with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    3. Install the front side of the rear seat assembly RH with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  3. INSTALL NO. 1 REAR SEAT CUSHION HINGE COVER


    1. Engage the 4 claws and install the No. 1 rear seat cushion hinge cover.

  4. INSTALL NO. 2 REAR SEAT CUSHION HINGE COVER


    1. Engage the 4 claws and install the No. 2 rear seat cushion hinge cover.

  5. INSTALL CENTER REAR SEAT HEADREST ASSEMBLY

  6. INSTALL REAR SEAT HEADREST ASSEMBLY