FRONT SEAT ASSEMBLY INSTALLATION

INSTALL FRONT SEAT ASSEMBLY
1. Place the front seat assembly in the cabin.
  
  Note
  
  Be careful not to damage the vehicle body.
2. Connect the connectors under the seat.
3. Temporarily install the front seat assembly with the 4 bolts.
4. Lift up the seat track adjusting handle and move the seat to the rearmost position.
5. Tighten the 2 bolts on the front side of the seat.
  
  Torque:
  
  37 N*m { 377 kgf*cm, 27 ft.*lbf }
  
  Tech Tips
  
  Tighten the bolts in the order indicated in the illustration.
6. Lift up the seat track adjusting handle and move the seat to the foremost position.
7. Tighten the 2 bolts on the rear side of the seat.
  
  Torque:
  
  37 N*m { 377 kgf*cm, 27 ft.*lbf }
  
  Tech Tips
  
  Tighten the bolts in the order indicated in the illustration.
INSPECT FRONT SEAT SLIDE ADJUSTER LOCK
1. During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously.
  
  If the seat adjusters do not lock simultaneously, loosen the seat fixation bolts to adjust the adjuster's position.
INSTALL INNER SEAT TRACK COVER
1. Engage the 2 claws and install the inner seat track cover.
INSTALL OUTER SEAT TRACK COVER
1. Engage the 2 claws and install the outer seat track cover.
INSTALL FRONT SEAT HEADREST ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL BATTERY BOX COVER
1. Engage the 3 guides to install the battery box cover.
INSTALL REAR DECK FLOOR BOX
1. Install the rear deck floor box.
INSTALL REAR FLOOR MAT
1. Install the rear floor mat.
INSPECT FRONT SEAT ASSEMBLY
1. w/ Seat Heater System:
  
  Check the seat heater operation.
  1. Turn the power switch on (IG).
  2. Push the seat heater switch ON.
  3. Wait 5 minutes or more and confirm that the seat surface becomes warm.
INSPECT SRS WARNING LIGHT

Click here