AIRBAG CUT-OFF SWITCH REMOVAL


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    1. A003TTXE02
      Text in Illustration
      *1 Stopper
      *2 Glove Compartment Door Stopper

      Disengage the claw and release the glove compartment door stopper.

    2. Bend portions (A) and (B) in the direction indicated by the arrows in the illustration to release the 2 stoppers, and lower the glove compartment door assembly until the front of the door is level.

    3. A003TCOE03
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door assembly horizontally toward the rear of the vehicle to release the 2 hinges, and remove the glove compartment door assembly.

      Note

      Pulling the glove compartment door assembly upward to remove it will cause the hinges to deform when reinstalling the door. Be sure to pull out the compartment door horizontally.

  2. REMOVE AIRBAG CUT-OFF SWITCH


    1. Disconnect the connector.

      Note

      When disconnecting any airbag connector, take care not to damage the airbag wire harness.

    2. A003T1ZE01

      Disengage the 2 claws and remove the airbag cut-off switch as shown in the illustration.