STEERING PAD ON-VEHICLE INSPECTION


  1. INSPECT STEERING PAD (VEHICLE NOT INVOLVED IN COLLISION)

    CAUTION:

    Be sure to correctly follow the removal and installation procedures for the steering pad.


    1. Perform a diagnostic system check Click here.

    2. Visually check for defects with the steering pad installed on the vehicle.


      1. The defects are as follows:


        • Cuts on the surface and in the grooves of the steering pad

        • Small cracks on the surface and in the grooves of the steering pad

        • Significant discoloration on the surface and in the grooves of the steering pad

        OK
        No defects are found.

        Tech Tips

        If any of the defects is found, replace the steering pad with a new one.

  2. INSPECT STEERING PAD (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


    1. Perform a diagnostic system check Click here.

    2. Visually check for defects with the steering pad removed from the vehicle.


      1. The defects are as follows:


        • Cuts on the surface and in the grooves of the steering pad

        • Small cracks on the surface and in the grooves of the steering pad

        • Significant discoloration on the surface and in the grooves of the steering pad

        • Cracks or other damage to the connector

        • Deformation of the steering wheel assembly

        • Deformation of the horn button contact plate of the steering pad

        • Interference or uneven clearance between the steering pad and steering wheel assembly when the new steering pad is installed on the steering wheel assembly

        OK
        No defects are found.

        Tech Tips

        If any of the defects is found, replace the steering pad or steering wheel assembly with a new one.