COMBINATION METER INSTALLATION


  1. INSTALL COMBINATION METER ASSEMBLY


    1. Connect the connector and temporarily install the combination meter assembly.

      Note

      When installing the combination meter assembly, do not damage the upper instrument panel sub-assembly or combination meter assembly.

    2. Install the combination meter assembly with the 4 screws.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. Engage the 2 claws and 4 clips, and install the instrument cluster finish panel assembly.

    2. Remove the applied protective tape on the steering column cover.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL BATTERY BOX COVER


    1. Engage the 3 guides to install the battery box cover.

  5. INSTALL REAR DECK FLOOR BOX


    1. Install the rear deck floor box.

  6. INSTALL REAR FLOOR MAT


    1. Install the rear floor mat.