COMBINATION METER REMOVAL


  1. REMOVE REAR FLOOR MAT


    1. A003TLX

      Remove the rear floor mat.

  2. REMOVE REAR DECK FLOOR BOX


    1. A003TAA

      Remove the rear deck floor box.

  3. REMOVE BATTERY BOX COVER


    1. A003UZD

      Disengage the 3 guides and remove the battery box cover.

  4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. Operate the tilt lever to lower the steering wheel assembly.

    2. A003SYGE02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    3. A003UH7

      Disengage the 2 claws and 4 clips, and then remove the instrument cluster finish panel assembly.

  6. REMOVE COMBINATION METER ASSEMBLY


    1. A003USY

      Remove the 4 screws.

    2. A003RM0

      Pull the combination meter assembly, disconnect the connector, and remove the combination meter assembly.

      Note

      When removing the combination meter assembly, do not damage the upper instrument panel sub-assembly or combination meter assembly.