METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on

      4. Enter the following menus: Body / Combination Meter / Utility / Customize / Warning.

      5. Select the setting by referring to the table below.

        Warning
        Display Default Content Setting Relevant ECU
        Driver Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination Meter Assembly
        Front Passenger Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination Meter Assembly
        Reverse Buzzer Continual Function to change the type of the reverse warning buzzer Single or Continual Combination Meter Assembly

        • *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more