SECURITY INDICATOR LIGHT ASSEMBLY INSPECTION


  1. INSPECT SECURITY INDICATOR LIGHT (AIR CONDITIONING CONTROL ASSEMBLY)


    1. A003TCEE02
      Text in Illustration
      *a

      Component without harness connected

      (Security Indicator Light (Air Conditioning Control Assembly))

      Apply battery voltage between the terminals of the indicator, and check the lighting condition of the security indicator light.

      Standard
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 6 (LP)

      Battery negative (-) → Terminal 5 (GND)

      		 Security indicator light comes on

      Note


      • If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator light will not come on.

      • Voltage of more than 12 V will damage the security indicator light.

      • If the voltage is too low, the security indicator light will not come on.

      If the result is not as specified, replace the security indicator light (air conditioning control assembly).